VMWare Workstation NAT problems in Windows 7

I learned from a co-worker this weekend that they were having trouble running VMWare Workstation VMs in NAT mode on the new release of Windows 7. It appears that this is fixed in the latest beta version of VMWare Workstation but until it reaches full release there seems to be a work around. I haven't tried this yet but I've read a lot of positive responses.


1. Run the Virtual Network Editor as Administrator (Use RunAS or right click and Run as Administrator on vmnetcfg.exe)
2. Goto Host Virtual Adapters and remove all VMNet instances (VMNet1 and VMNet8 typically).
3. Click Apply.
4. Add New and Assign it the new adapter to VMnet1.
5. Click Apply.
6. Select the Host Virtual Networking tab.
7. Click the > next to VMnet1 and change the address and subnet to the ICS network (192.168.37.0 / 255.255.255.0)
8. Click Apply.
9. Go to the NAT tab and select VMNet1.
10. Click Edit and change the Gateway to the ICS gateway IP (192.168.37.1)
11. Click Apply and restart the NAT service. (Counter-intuitive, I know.)
12. Go to the DHCP tab.
13. Add VMNet1 and remove all others.
14. Click Apply.
15. Select Properties of VMNet1 in DHCP Tab.
16. Enter a Start and End Address for DHCP Scope (192.168.37.50 to 192.168.37.75 as an example)
17. Adjust client lease to a few days to avoid potential DHCP client renewal timeouts.
18. Click OK / Click Apply.
19. Select Host Only Networking for every VM that needs NAT out to your host network/internet.
20. Enable ICS (Internet Connection Sharing) on the W7 Host network card that provides connectivity. Select VMNet1 as the network card that needs access.


This thread explains the issue in more detail:

http://communities.vmware.com/message/1309197